Olympus E-PL2 Bedienungsanleitung PDF herunterladen (Seite 116)

116

SAFETY PRECAUTIONS

remove it immediately after using the camera.

Always unload the battery from the camera

before storing the camera for a long period.

This camera uses a lithium ion battery

speciﬁ ed by Olympus. Do not use any

other type of battery. For safe and proper

use, read the battery's instruction manual

carefully before using it.

If the battery's terminals get wet or greasy,

camera contact failure may result. Wipe the

battery well with a dry cloth before use.

Always charge a battery when using it for

the ﬁ rst time, or if it has not been used for a

long period.

When operating the camera with battery

power at low temperatures, try to keep

the camera and spare battery as warm as

possible. A battery that has run down at

low temperatures may be restored after it is

warmed at room temperature.

The number of pictures you can take may

vary depending on the shooting conditions

or battery.

Before going on a long trip, and especially

before traveling abroad, purchase extra

batteries. A recommended battery may be

difﬁ cult to obtain while traveling.

When the camera will not be used for an

extended period, store it in a cool place.

Please recycle batteries to help save our

planet’s resources. When you throw away

dead batteries, be sure to cover their

terminals and always observe local laws

and regulations.

Caution for Usage Environment

To protect the high-precision technology

contained in this product, never leave the

camera in the places listed below, no matter

if in use or storage:

Places where temperatures and/or

humidity are high or go through extreme

changes. Direct sunlight, beaches,

locked cars, or near other heat sources

(stove, radiator, etc.) or humidiﬁ ers.

In sandy or dusty environments.

Near ﬂ ammable items or explosives.

In wet places, such as bathrooms

or in the rain. When using products

with weatherproof designs, read their

manuals as well.

In places prone to strong vibrations.

Never drop the camera or subject it to

severe shocks or vibrations.

When mounted on a tripod, adjust the

position of the camera with the tripod head.

•

Do not twist the camera.

Do not leave the camera pointed directly

at the sun. This may cause lens or shutter

curtain damage, color failure, ghosting on

the image pickup device, or may possibly

cause ﬁ res.

Do not touch electric contacts on cameras

and interchangeable lenses. Remember to

attach the body cap when removing the lens.

Before storing the camera for a long period,

remove the battery. Select a cool, dry

location for storage to prevent condensation

or mold from forming inside the camera.

After storage, test the camera by turning it

on and pressing the shutter release button

to make sure that it is operating normally.

The camera may malfunction if it is used in

a location where it is subject to a magnetic/

electromagnetic ﬁ eld, radio waves, or high

voltage, such as near a TV set, microwave,

video game, loud speakers, large monitor

unit, TV/radio tower, or transmission towers.

In such cases, turn the camera off and on

again before further operation.

Always observe the operating environment

restrictions described in the camera's manual.

Do not directly touch or wipe the image

pickup device of the camera.

LCD Monitor

Do not push the monitor forcibly; otherwise

the image may become vague, resulting in

a playback mode failure or damage to the

monitor.

A strip of light may appear on the top/bottom

of the monitor, but this is not a malfunction.

When a subject is viewed diagonally in the

camera, the edges may appear zigzagged

on the monitor. This is not a malfunction; it

will be less noticeable in playback mode.

In places subject to low temperatures, the

LCD monitor may take a long time to turn on

or its color may change temporarily.

When using the camera in extremely cold

places, it is a good idea to occasionally place

it in a warm place. An LCD monitor exhibiting

poor performance due to low temperatures

will recover in normal temperatures.

The LCD used for the monitor is made with

high-precision technology. However, black

spots or bright spots of light may appear

constantly on the LCD Monitor.

Due to its characteristics or the angle at

which you are viewing the monitor, the spot

may not be uniform in color and brightness.

This is not a malfunction.

•

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 122 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare

Olympus E-PL2 Bedienungsanleitung Seite 116

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kameras Olympus E-PL2